Pneumatic Forklifts

Pneumatic Forklifts Training St Catharines - Pneumatic forklifts are referred to as pallet vehicles or pump trucks and are commonly utilized in warehouses and delivery facilities to transport materials on pallets. Pneumatic jacks consist of a pair of steel blades installed on a wheeled counterweight that contains a pump. The pump is used to lift and lower the forks.

Visually check the pallet lift before loading. Make sure the wheels are clear of any possible obstructions. Additionally, make sure the handle moves smoothly and turns properly. Inspect the pallet before moving it to determine if it is stacked in a manner that minimizes the chance of anything falling off during lifting. Release any air in the pump and let down the blades to the ground by squeezing the lever installed on the inside of the metal loop on the end of the lever. Run the forks into the slots in the pallet and make sure the blades are centered so that the pallets' mass is evenly distributed.

Pump the pneumatic lift lever up and down to lift the blades from the floor. Stop pumping when the pallet is fully off the floor as there is no need to lift it any higher or risk losing balance while turning. In order to shift the pallet, drag the handle behind you; you should not push it. There will be a large amount of momentum existing. Refrain from quick or sharp turns and don't stop too abruptly. Gently bring the pallet to a stop wherever you would like to park it. Squeeze the handle inside the grip end to return the forks to the ground. Pull out the forks from the pallet and return the pallet vehicle to its chosen parking spot.

Click to Download the pdf