St Catharines Manlift Certification

St Catharines Manlift Certification - The Elevated Platforms and Manlifts Certification course helps to provide the needed training on the safe operating procedures, work practice, regulations and rules regarding the daily activities for the operators of this machinery. The course has been designed for people who are actively involved in these activities or those who have a basic knowledge of this equipment.

During the past couple of decades, manlifts and aerial platforms have become a common sight in industrial maintenance applications and on construction job sites. These machinery provide an easy way to lift staff close to what has to be done on a stable platform apparatus, enabling staff to perform tasks with greater comfort and safety rather than being perched on top of scaffolding or ladders.

Like every other tool, manlifts are just safe when they are utilized correctly. As they elevate employees above ground level or floor, accidents could happen easily and this may result in serious injuries or fatalities for both the manlift operators and any passerby who may not be lucky enough to be standing below.

Manlifts come in a variety of kinds. Most fit into 1 or 2 categories: the scissor lift, which is capable of moving up and down and the articulating boom lift, which can move both horizontally and vertically.

Protecting Staff

Proper training is vital in regard to safety matters. Many of the companies which rent manlifts would provide training at the jobsite. Each and every worker who would be working on the machinery or operating it must receive training in safe operations. It is also important that only those employees who have received training must be authorized to operate the controls. Communication rules and operating procedures should be clear. Hence, employees on the ground must not operate controls without the knowledge and approval of any workers in the basket.

Those staff who will be occupying the basket are required to wear correct fall protection including a harness and lanyard. That protection must be attached to the manlift itself and not to a surface nearby. The worker must ensure that she or he has made whichever adjustments needed to reflect the change in fall distance if there are changes in the height of the work area.

To make certain that the manlift is in good operating condition, manlifts need to be inspected and tested each and every day. Prior to the machine being used, any defects need to be re-checked and repaired.

Click to Download the pdf